Recherche

Spinner

Avantone CLA-200

Avantone CLA200
Prix 850,00 € État de l'article :
Neuf
Frais de port France : 15,00 €
Frais de port Union Européenne : 20,00 € Quantité : Ajouter au panier
Avantone
Cla200_1_2500x2500
  • Cla200_2_2500x2500
  • Cla200_3_2500x2500

description

  • 850€ au lieu de 1000€ TTC

  • Amplificateur de studio refroidi par convection
  • Classe AB, technologie classique
  • Puissance : 2x 300 Watt sous 4 Ohm, 2x 200 Watt sous 8 Ohm
  • Bridge Mono : 500 Watt sous 8 Ohm
  • Réponse en fréquence : 20 - 20 000 Hz
  • THD : < 0,1%
  • Rapport signal/bruit : >94 dB
  • Entrées : 2x XLR femelles
  • Sorties : 2x XLR mâles Link, 2x sorties borniers à vis et 2x Speaker Twist
  • Dimensions : 483 x 457 x 89 mm
  • Format rack 19" - 2U
  • Poids : 20 kg

The Avantone Pro CLA-200 Studio Reference Amplifier is a classically designed Class A/B amplifier. We took particular care to create an amplifier in the traditional studio style, with generous VU meters, high quality Japanese components and a serious toroidal transformer linear power supply. In a standard 2U rack mount chassis, this amplifier can generate over 200 watts per channel into an 8 ohm load, making it perfect for medium to large speakers in a studio environment. The CLA200 is convection cooled – no fan noise, so it can be used in the same room as the monitors.

The CLA-200 Studio Reference Amplifier is designed to be used in a studio environment requiring high power output with no fan noise. Under testing, it delivers a powerful 208 watts into 8 ohms and can run at one third power without thermal fault.

The CLA-200 was designed to be paired with the CLA-10 studio monitors, but it can be used with just about any demanding speaker load. Very low distortion, steady performance under harsh conditions, and an open and transparent sound make this an obvious choice for discerning studios.

Engineering Objectives

The Avantone Pro CLA-200 Studio Reference Amplifier is a dynamic, high output, high resolution, full-range system built the old school way. We included no-compromise components in a 2U convection cooled chassis to complement our CLA-10 Studio Reference Monitors. Of course, it can be used with any passive studio monitor requiring serious dynamic range.

 

 

Articles similaires

Mpa90_3qtr

Drawmer MPA-90

Ampli 2 x 90W
699,00 €
Power_2400_front

PMC 2400

ampli monobloc PMC 2400
4 100,00 €
Power_2400_front

PMC 2400 Paire

PMC 2400 paire
8 000,00 €
Cpa50_cds

Drawmer CPA-50

ampli 2 x 50W
400,00 €
Ask-dealer