Recherche

Spinner

Avantone CK-6

Large membrane cardioide FET
Prix 225,00 € État de l'article :
Neuf
Frais de port France : 15,00 €
Frais de port Union Européenne : 25,00 € Quantité : Ajouter au panier
Avantone
1009-2_full
  • 1009-1_full
  • 1009-0_full
Télécharger le manuel

description

Avantone CK-6 Large Capsule Cardioid FET Condenser Microphone

The Avantone "Cabernet (C-series)" mics are designed to offer true professional performance. They will meet or surpass the performance and specifications of much higher priced mics.

The Avantone CK-6 is truly a gorgeous looking and sounding microphone. The design, character and performance can be compared directly to fine studio-standard FET micsbut at a fraction of their cost! Our rugged CK-6 microphone body and capsule assembly are precision machined of brass.

Aesthetically, it features an elegant Cabernet Wine-Red finish, accented with polished nickel trim and capsule assembly. The transformerless Discreet Class A FET circuitry will yield pleasing professional results comparable to much more expensive designs. The CK-6 houses a 32mm gold-sputter thin Mylar capsule.

The CK-6 in its normal stock version uses high grade Polystyrene and Metalized Polypropylene capacitors in the audio path. This represents our commitment to quality as these normally are the type of "upgrade" components that are implemented by microphone modders/hot-rodders! Any studio can proudly offer the CK-6 for instrumental and vocal mikingIt exudes class visually as well as sonically.

Manufactured using the finest materials yielding a very solid feel, superb structural integrity and rugged reliability. The versatile CK-6 mic is able to produce professional results with a clean sonic character.

The included Custom Retro Shockmount is superb in allowing a precise positioning of the mic while inhibiting the transfer of unwanted vibrations up into the mic. This isolation allows for superior professional results.

The CK-6 has separate -10 dB pad & 80 Hz LF roll off switches....The -10dB attenuation switch can be engaged when miking very high SPL sources to keep from overloading the electronics. The 80Hz high-pass filter switch can be engaged to reduce rumble and to keep unwanted low frequencies from "muddying up" the track.

Features

Uses Include
Studio vocals, acoustic guitar, mandolin, drum overheads, piano, etc

Standard Items Supplied

  • Avantone CK-6 Cardioid FET Microphone
  • Avantone Custom Retro Shockmount
  • Elegant padded genuine wooden Mic box
  • Padded Aluminum storage / travel case
  • Owners Manual

Specifications

Type
True Transformerless Condenser

Polar Pattern(s)
Cardioid

Capsule
Single-sided 32mm center-terminated gold-sputtered Mylar (6 micron)

Frequency Response
35-20,000 Hz +/- 3.5dB

Output Impedance
<=200 Ohms

Maximum SPL
136dB (0.5% THD @1000Hz)

Equivalent Noise Level
<17dB

Output Connector
Male XLR 3-pin

High-Pass Switch
80 Hz 6dB/octave

Attenuation Switch
-10 dB

Power Requirement
Standard 48 Volt Phantom / 5mA

Included Accessories
-Shockmount
-Wooden Box in Metal Carrying Case

Dimensions
155mm x 46mm

Weight
.4 kg / .9 lb

Finish
Polished Nickel trim / Metallic Cabernet Red Body

Articles similaires

1016-0_full

Avantone Atom

Micro dynamique pour Toms
120,00 €
1013-0_full

Avantone ADM

Micro dynamique pour caisse claire
120,00 €
1033-0

Avantone CV-95

Micro à lampes
699,00 €
1002-0_full

Avantone CV-12

Large membrane à lampes
610,00 €
Ask-dealer